> Seats & Trim
Fume Curtain Hood Stick Kits
Got a Land Rover with a hood that has
seen better days?
Tears? Frayed fixings? Scratched windows?
Well give your vehicle a quick facelift with a new
canvas hood from Britpart.
Note - Hood stick not included - 330553 330999 Series 2, 2A & 3 SWB
332951 Series 2, 2A & 3 LWB
331110AG Series - SWB
331113AG Series - SWB
331110SA Series - SWB
331113SA Series - SWB
331110BL Series - SWB
331371AG Series - SWB
Three quarters hood
Khaki Without windows
331259AG Series - LWB
331260AG Series - LWB
331259SA Series - LWB
331260SA Series - LWB
Defender 90 Full hood
Sand With windows
Defender 110 ¾ hood
Khaki With windows
Photo courtesy of Henry van Vliet
> Hoods are made from the original 18oz canvas and
made to OEM specifications.
> All fittings are brass and made to OEM specifications.
> Webbing is made the same way as the original.
> Polypropylene rope is the same construction as the
> Ropes are all inserted into the hood to help customers.
> Care instruction are included.
Other hoods available on request - please ask for details.
331113SA 331113AG 331259SA
Enjoy warm seats at the flick of a switch
These retrofit seat heaters will allow you to enjoy a comfortable and warm seat in any Land Rover vehicle with a
removable seat cover. These highly durable and flexible heating elements are placed between the upholstery and
seat cover on the seat base and back and will not alter the shape of the seats.
There are two switches provided for the driver and passenger seats which allow the heat output to be altered to
the two different settings. A ready-made cable set connects the switches to the 12V on-board power supply to the
heat the pads. There are integrated temperature sensors which ensure that the seat heater will not overheat.
Operating voltage: 12 volt
Output: Low - 44 watts / High - 90 watts
Dimensions: Seat base - 400 x 280mm / Backrest - 300 x 280mm
> Complete set for driver and passenger seats.
> Two stages of heating.
> Kit includes four heating elements and items needed for installation.
> Pre-assembled cable set with switching relay and buttons included.
> Temperature guard to prevent overheating.
> Heating elements are durable and extremely flexible.
> For use on seats which have a removable cover.
> Includes fitting materials and instructions.
> Test mark: e-approved to 95/54/EC (EMC guidelines for vehicles)
Retrofit Seat Heaters
Waeco version available. www.britpart.com/DA5717W for full details