Simpson Rooftop Tent & Annex
1,400mm wide x 2,400mm long x 1,300mm high
The ARB Simpson III Rooftop Tent will provide the ultimate
in ease and convenience when travelling. Unfolding in
minutes, a rooftop tent provides sleeping quarters off
the ground, protected from the elements. Spacious and
comfortable, all bedding can remain inside the tent during
the journey, freeing up vital storage space in the vehicle,
and allowing the tent to be quickly and easily packed
away. More images available online.
> Incorporates an updated design and new materials for
better strength, rigidity and water resistance.
> Manufactured from high quality, poly/cotton fabric.
> Incorporates Oxford polyester flysheet with excellent
water shedding ability.
> Sturdy aluminium retractable ladder.
> High density bonded chip foam mattress with
removable cover for increased comfort and durability
> Incorporates pull out veranda.
> Insect screened windows and door.
> UV stabilised laminated PVC cover.
> Bungee cord system to assist when closing.
> Easily mounted to ARB’s purpose designed roof rack.
> Can be configured to unfold off either the side or off the
rear of the vehicle.
> All aluminium components feature an anodized finish
for improved corrosion resistance and appearance.
> Comes complete with mounting hardware, wrenches,
ladder, travel cover and comprehensive instructions.
> ARB awnings can also be paired with the rooftop tent.
Simpson Annex - available separately
Simpson Ladder extension.
Made to the highest quality, providing
a convenient solution for vehicles
with a higher than normal rack height.
Required when rack height is over 2m.
ARB SkyDome Single Swag Tent
ARB SkyDome Double Swag Tent
2150mm (L) x 900mm (W) x 800mm (H) to 450mm (H)
2150mm (L) x 1,400mm (W) x 800mm (H) to 450mm (H)
Weight - 10.5kg
Weight - 14kg
Incorporating the latest in swag design and comfort, the ARB SkyDome swag has been designed from the ground up
to meet the exact needs of 4WDers and tourers alike. To counter the claustrophobic feeling caused by some swags,
ARB’s SkyDome range has been designed with very generous dimensions. The industry-leading height from head to
hip allows occupants to move around freely and spread out without feelings of confinement. The large mesh areas
provide excellent ventilation to reduce internal condensation, with additional canvas flaps and insect-proof mesh in
the roof zone of the Series II improving cross-flow ventilation to enhance airflow and make it cooler and even more
comfortable during warmer nights. The freestanding architecture means ARB SkyDome swag require no pegs or guy
ropes when deployed on flat surfaces. Matched with waterproof materials and a high-density corrugated 75mm foam
mattress, the SkyDome will ensure a dry and comfortable night’s sleep in any conditions.
> 500gsm – rot & mildew proofed canvas
> High tensile wax coated core spun thread
> Ultra-fine 135gsm midge proof mesh
> 970gsm PVC base
> 75mm corrugated foam with anti-microbial treatments
> Improved air ventilation
> Genuine no#10 YKK zippers with anti-corrosion
> 11mm aluminium poles
ARB Mesh Multi Mat
Providing a comfortable living space when touring or
camping is key to enjoying those times with family and
friends. The ARB Mesh Multi Mat keeps you and your
gear clean, while minimizing the impact on the ground
at campsites. The ARB Mesh Multi Mat comes with
zinc coated preset eyelets to fit the legs of the ARB
2500mm awning and 2000mm awning, as well as the
ARB Skydome single or double swag. The mat has been
built so it can be used with the ARB awning as well as
the swag at the same time. In addition to being a ground
cover, the ARB Multi Mesh Mat also can be used as a
shade sail providing protection from the sun.
> 2.5m (8.2ft) x 2.4m (7.9ft) floor space
> 350gsm PVC coated, UV stabilized mesh fabric
> Heavy duty, 50mm wide reinforced webbing
> Corrosion resistance, black zinc coated eyelets
> Preset eyelets to accommodate ARB Skydome Single
and Double Swags
> Preset eyelets to accommodate ARB Awnings 2.5m
> High tensile strength conforming to
> Nylon carry bag with drawstrings for convenient
> ARB brand patches to help identify orientation when
When designing the new range of SkyDome swags,
the boot mat found on numerous other swags was
intentionally omitted due to the nature of these flaps
getting dirty and soiling the swag when rolled up. The
BootSwag is ARB’s creative solution to this challenge
and features a zippered front flap, large boot mat and a
dome section made from waterproof Oxford fabric. Being
a standalone item, the BootSwag can also be used with
other touring products including the ARB roof top tents
where it can be placed at the foot of the ladder.
Boot swag - 460mm L x 500mm W x 340mm H
Boot mate - 580mm L x 500mm W
> Waterproof, heavy-duty PVC base and boot mat
> Designed to protect footwear from the elements at
> Manufactured from PU coated Oxford polyester for
optimum water shedding ability
> Free standing design with 4 pegs included
> Durable fibreglass bows and rod
> YKK zipper and nickel plated brass eyelets for corrosion
> PU coated Oxford polyester storage bag
ARB Cargo Gear SkyDome Swag Bags
Single SkyDome Swag
1,000mm long x 450mm diameter
Double SkyDome Swag
1,500mm long x 450mm diameter
These ARB Cargo Gear bags have been developed
specifically for storage and transit of the ARB SkyDome
Swags. The bags feature molded rubber carry handles on
either end along with a removable shoulder strap. Unique
to the swag bags are four adjustable tie down straps
integrated into the bag to allow it to be secured to a roof
rack without the need for additional straps.
> Outer shell made from tough, Oxford weave PU coated
fabric and rubber panelling
> All seams are heat sealed and taped to ensure storm
> Roll up top closure with ‘Sure Grip’ buckles to create
water resistant seal
> Removable body curve shoulder strap
> Grab handles on either end of bag
ARB products available
in the UK only.
Tent, Shade & Shelter - continued