
> Enhancements
Defender Electrical Enhancements
236 www.britpart.com
Dual USB Charger
DA4679
Easy to install in existing 12V DC socket hole providing
convenient access for charging mobile devices.
> Compatible with popular mobile devices
> Protective cap
> Easy to use
Maximum output current - 2.1A DC (total)
Cut out dimensions - 1⅛ in (28.58 mm) diameter hole
Input voltage - 12V
Output voltage - 5V DC +/- 5%
Parasitic current draw - 15mA
USB - 2.0
Electric Window Kit
DA4664
Defender - 2002 onwards
Fed up with winding your windows up and down?
Make life easier, add electric front windows to your
Defender with this comprehensive kit.
Includes fitting instructions.
Retrofit Insert Seat Heaters
DA5717
> Complete set for driver and passenger seats.
> Two stages of heating.
> Kit includes four heating elements and items needed
for installation.
> Pre-assembled cable set with switching relay and
buttons included.
> Temperature guard to prevent overheating.
> Heating elements are durable and extremely flexible.
> For use on seats which have a removable cover.
> Includes fitting materials and instructions.
> Test mark: e-approved to 95/54/EC
(EMC guidelines for vehicles)
Full details in the Seats & Trim section.
Heated Mirror Kit
DA4598
MUD-UK Defender heated mirror elements are unlike any
other heated mirror element. They use the same carbon
impregnated glasscloth technology found in underfloor
heating and high-end bathroom mirror applications.
Unlike traditional printed circuit heated mirror elements
the current flow in flexible glasscloth is across the whole
surface area of the element. This results in a larger
‘heated’ surface area and avoids the “striping” effect of
traditional elements. The mirror elements have no fine
circuits which can damage easily and offer improved
durability and performance over traditional printed circuit
elements. The heated mirror elements are supplied with
self-adhesive backing. Peel off the backing and stick
the element to the back of the Defender mirror glass.
Also supplied with a fitting kit that consists of 4m of twin
core wire, assorted terminals and a relay. A switch is
not supplied which allows the installer to match up any
existing switches already installed. The wiring can be
concealed within the arm of the wing mirror, to create a
neat and tidy finish. Elements measure 115mm x 167mm.
Plug & Play Cruise Control System
DA7480 Defender - 2007 onwards
Stalk fits to the right hand side of the steering column.
DA5717W
Waeco version available.
www.britpart.com/DA5717W
for full details
LED Interior Lamp
DA6554
Defender - 1991 onwards
Light grey
MUD has worked in conjunction with one of the UK’s
leading automotive lighting manufacturers to create a
100% British designed and manufactured product that
uses only the highest quality components. The MUD LED
Interior Lamp utilises ceramic LED technology to provide
18 x more usable light than the traditional festoon bulb
design and with a rating of 228 lumens is 400% brighter
than the factory fitted Land Rover interior lamp. With a
colour temperature of circa 6,000K, the LED light output
falls into ‘daylight’ classification providing better colour
rendition, i.e. colours look more true to life. Another neat
feature of the MUD LED Interior lamp is the switchable
white to red illumination function for improved night-time
vision. Plug & Play connection with fixings supplied. The
MUD Interior LED Lamp will replace both front and rear
interior lamps in the Land Rover Defender. Rear Station
Wagon fitment requires the use of the optional MUD LED
Lamp plinth - DA6555. These lamps will fit the Defender
roof consoles - DA4629 & DA4629B.
LED Interior Lamp Plinth
DA6555
Defender - 1991 onwards
Light grey
The MUD LED interior lamp plinth allows you to fit the
popular MUD LED lamp to the rear of a Defender Station
Wagon. The plinth gives enough room to allow the lamp
to fit to the existing wiring. Please note the plinth is not
required when fitting to the front of the vehicle.
DA6554 / DA6555
Voltmeter
Gauge
DA7481
Defender - up to 2006
Defender - 2007 onwards with additional pod
Photo courtesy of Sebastien Fiastre
12 Volt Dash Socket
DA4698
> Features watertight cap, easy installation and twist locks
securely with plug
> Designed to withstand the rigours of damp
environments and constant vibration
> Large contact surfaces for good electrical connection
> Twist lock system - plug locks securely into socket
> Internal strain relief and cord seal
> Nickel plated copper alloy used for all current carrying
components
> Front panel, rear panel or surface mount
Specifications
Maximum voltage - 12V DC
Cut-out dimensions - 1⅛” (28.58 mm) diameter hole
Maximum socket amperage - 15A