> Exterior Protection
Underside Protection Fuel Tank, Steering/Sump & Transmission Guards
DA5508 DA7530 DA1368
DA7536 / DA7532 DA5625
These guards from Britpart are manufactured from high-quality, hard-wearing and
corrosion resistant materials to counteract any unforeseen obstacles your Land Rover
may encounter whilst off-roading. All fixings are supplied and the guards fit into the
vehicle’s pre-existing holes. Each guard has holes at the front to allow for water drainage
and also to help with ventilation for the cooling system.
DA5507 Defender - 1985 -2006 & 2007 onwards
Aluminium Main plate - 8mm thick; brackets - 8mm thick RHD
DA5507LHD Defender - 1985 -2006 & 2007 onwards
Aluminium Main plate - 8mm thick; brackets - 8mm thick LHD
DA5507KIT Spare fitting kit for DA5507 & DA5507LHD. Nuts, bolts & washers.
DA5508 Discovery 1/Range Rover Classic
Aluminium Main plate - 8mm thick; brackets - 8mm thick RHD & LHD
DA2249 Discovery 2
Powered coated steel Main plate - 5mm thick; brackets - 5mm thick RHD & LHD
Note - For use with Discovery 2 winch bumper DA5645
An essential purchase for any off road use as they prevent damage to the underside
of the engine and the intercooler at the front of the vehicle. Manufactured from 8mm
5083 aluminium with a smart silver or black finish and supplied completely machined
and drilled ready to bolt directly to the 4 pre-drilled holes in the chassis with supplied
galvanised fixings. The guard requires no additional drilling just unscrewing and
unclipping of the plastic OEM parts. Fitting should take 5 minutes.
Discovery 3 DA7530 Silver finish DA7530B Black finish
Discovery 4 DA7535 Silver finish DA7535B Black finish
Great protection from hidden dangers.
Lightweight Steering Guards
Full details in the
DA7536 Discovery 3
This sump plate protects the underside of the engine and allows the car to slide over
objects, forward and backwards due to the rear lip. With a natural finish the plate is
made from 6mm 5083 grade aluminium and has been water jet cut to a precise finish.
Plate bolts directly into existing holes and bulkheads already in the chassis, using the
standard Land Rover fixings.
DA5625 Defender - Td5
Reduce damage to your Defender 90. Made from galvanised steel, this transmission
guard protects your 90’s gear box and cross members from snagging and reduces
damage to your vehicle. Bolts on and is easy to fit and importantly it is also easy
to remove when your vehicle needs servicing. Note - Only fits with centre exhaust
removed and pipe fitted.
DA7532 Discovery 3
This transmission plate protects the underside of the transmission and allows the car
to slide over objects. With a natural finish the plate is made from 6mm 5083 grade
aluminium and water jet cut to a precise finish. Plate bolts directly into existing holes
and bulkheads already in the chassis, using the standard Land Rover fixings and two
additional fixings. Note - Can only be fitted when sump plate (DA7536) is also fitted.
Fuel Tank Guards
DA6538 Defender 90 - Td5 & 2007 onwards
DA6539 Defender 110 - Td5 & 2007 onwards
Protect your Defender’s fuel tank. Manufactured from 6mm aluminium.
Fuel Cooler Guard Diff Guards Universal Joint Silicone Sleeves
DA2250B Electroplate finish
DA2250GALV Galvanised finish
Defender/Discovery 1/Range Rover Classic
Give your vehicle some extra protection with a diff
guard. This guard is simple to fit (no drilling) and has
the added advantage of having the fill plug accessible
at all times.
Defender - Tdci
cooler with this easy
to fit electro-plated
Suitable for Series, Defender, Discovery 1, Discovery 2
& Range Rover Classic. By adding one of these silicone
sleeves you will reduce debris from building up in the
universal joint which, in time, will increase the life span of
Rear UJ silicone sleeve for 63mm diameter propshafts
Rear UJ silicone sleeve for 51mm diameter propshafts