
> Suspension & Axle
www.britpart.com 157
Propshaft Spacer Kits DA6355
Defender/Discovery 1/Range Rover Classic
> 300Tdi & Td5 manual models only
> Double cardan extreme use front
propshaft with flange and fitting kit.
> For vehicles with L230 transfer boxes.
> Ideal for use with lifted vehicles.
> Helps to reduce driveline vibration
where diff and transfer flanges are not
in-line.
Note - Flange must be fitted
to transfer box.
Wide Angle Propshafts
If your Land Rover has raised suspension or been modified for extreme axle articulation then the joints on the
existing propshaft will become strained. This will cause the propshaft to lock up or vibrate and wear the universal
joints prematurely. Dropping the axle further away from the chassis is great for looks, articulation and off-road
performance - a neat solution is to fit a wide angle propshaft. This allows drivetrain angles of up to 32 degrees
which reduces vibration, universal joint ‘bind-up’ and premature wear on the joints. These wide angle shafts have
greasable universal joints which are more desirable where longer life is required.
DA6350 Front Defender - from MA - 300Tdi & Td5/Discovery 1/Range Rover Classic - 1986 - 1991 FRC8386
DA6352 Front Defender - up to LA (1993) FRC8390/FRC5566
DA6351 Rear Defender 90 - 4 cylinder FRC8392
DA6353 Rear Defender 90 - V8 - up to 2007 & diesel from MA FRC8393
DA6354 Rear Discovery 1 - 1989 - 1994 & V8 from 1997 FRC8387
DA6356 Replacement heavy-duty universal joint for wide angle propshafts
Nut & bolt kit - each kit contains 4 nuts - for transfer box end & 4 nuts & bolts - for diff end. Enough nuts &
DA1123
bolts to make propshaft repair out in the field. Suitable for DA6350; DA6351; DA6352, DA6353 & DA6354.
DA6356
> Solid heavy-duty arms which are suitable for off-road use
> Improves steering response
> Zinc plate finish to increase corrosion resistance
With Grease With OEM
Nipples Track Rod Ends
DA5501 DA5501M DA5501G Series 4 track rod ends
DA5502 DA5502M DA5502G Defender 90/110 3 track rod ends
DA5503 DA5503M DA5503G
DA5502
Discovery 1
Range Rover Classic
3 track rod ends
DA5504 DA5504M DA5504G Discovery 1 4 track rod ends
DA5509 Discovery 2 4 track rod ends
DA5541 Fixing kit for DA5503 & DA5504
Left hand replacement nut for
DA5527
DA5501/DA5502/DA5503/DA5504
Right hand replacement nut for
DA5528
DA5501/DA5502/DA5503/DA5504
Track Rod End Replacements
2 x RTC5867 & 2 x RTC5868
2 x RTC5869 & 1 x RTC5870
2 x RTC5869 & 1 x RTC5870
2 x RTC5869 & 2 x RTC5870
Propshafts
Steering
Propshaft Kit Propshaft & Flange
Bolt Kits
Steering Dampers
Heavy-Duty Steering Arms
Britpart Cellular Dynamic
DC6004 Defender
DC6005 Discovery 1/Range Rover Classic/Series
DC6009 Discovery 2
DC6006 Range Rover P38
Britpart Super Gaz
DC5004 Defender
DC5005 Discovery 1/Range Rover Classic/Series
Improves steering
response
DC5004
Old Man Emu
DA8925 Defender 90, 110 & 130
500555 NEW Replacement mounting kit for DA8925
DA3066 Discovery 1
DA3135 Discovery 2
DA3066 Range Rover Classic
Features
> 9 stage valving for optimum
performance.
> Massive 35mm bore.
> Stone guard.
> Fits original mounts.
> 50/50 valving.
Steering dampers with
nitrogen charged foam
cell for reduced wheel
vibration and improved
handling and control.
Available in the UK only.
DA8925
DA5501
DA5503M
DA5504
DA5527
DA5502
DA5509
DA5541
DA6339 15mm spacer kit
DA633925 25mm spacer kit
Defender/Discovery 1/Range Rover Classic
Propshaft spacer kit machined from billet
aluminium and anodised deep blue. When
suspension lift kit is fitted it increases the
distance between the transfer box flange
and the diff flange. This increased distance
can cause the propshaft to run out of
spline travel.
DA633925
DA1424
Fitting this prop spacer helps return the propshaft to its
normal operating length therefore allowing full spline travel which also helps reduce the
characteristic “binding” of the yokes when a propshaft is over extended.
DA1423
4 x 509045P - Propshaft bolt
4 x BT606101L - UNC flange bolt
8 x NZ606041L - Nut
DA1424
4 x 509045P - Propshaft bolt
4 x FRC3602 - UNF flange bolt
8 x NZ606041L - Nut
DA1123
Wide angle nut & bolt kit suitable for
DA6350; DA6351; DA6352, DA6353 &
DA6354
DA6353
DA1123