
> Suspension & Axle
Springs Air Lift Kits
Air Springs
DA2373
DA2372
Leaf Springs Parabolic Springs
265627
152 www.britpart.com
Adjustable Air Helper Springs - The load
and towing problem solver
Air adjustability is the difference! Stiff steel factory
suspensions must compromise between ride comfort and
load hauling capacity. Smooth ride suspensions can’t carry
heavy loads; heavy springs ride rough, especially when
the vehicle is unloaded. Air Lift adjustable air springs solve
these problems by allowing you to tune your suspension
under all load and road conditions. Just add air when
towing or hauling and then remove air for a softer ride
when unloaded.
Features & benefits of Air Lift 1000
> Improve ride, handling and stability by reducing roll,
sway and 'bottoming out'
> Fits open coil springs, front or rear
> Up to 1,000lbs of levelling capacity
> Tough long-lasting moulded polyurethane construction
> Quick connecting easy-to-use engineered polymer air
fittings
Air Lift 1000
DA5010
Defender 110 /130
DA5011
Defender 90/Discovery 1/Range Rover Classic
DA5011
DA5010 / DA5011
DA5012
Load Controller II
DA5012
The economical, popular, basic on board air system. This
system controls the rear bags equally. All kits include
wiring harness for fast, easy installation. To eliminate the
major cause of air spring failure, the low pressure sensor
automatically activates if pressure falls below the minimum
safe level.
Air springs can be susceptible to air leaks due to the fact the
rubber seals dry out. Why not firm up your suspension and replace
them with these quality air springs from Britpart?
RKB101200 Discovery 2 Rear
DA2372 Range Rover P38 Front
DA2373 Range Rover P38 Rear
REB101740 Range Rover P38 Front
RKB101460 Range Rover P38 Rear
Note - All sold individually.
For many years Land Rover road springs have been difficult to obtain to the correct
OE specification. To remedy this, Britpart commissioned the same Spanish factory
that produces our Santana parabolic springs to reproduce a comprehensive range
of springs for Land Rover Series vehicles. The springs are constructed from the
correct grade alloy steel 60SiCr8, heat treated consisting of hardening & tempering
and set as Land Rover engineers specified and therefore will give years of service
with the correct ride comfort.
241283 SWB Petrol Front 9 Leaf O/S
242863 SWB Petrol Front 9 Leaf N/S
265627 SWB & LWB Diesel Front 11 Leaf O/S
264563 SWB & LWB Diesel Front 11 Leaf N/S
517588 SWB Rear 11 Leaf O/S
517589 SWB Rear 11 Leaf N/S
243123 SWB Rear Single main leaf O/S & N/S
279678 LWB Rear 10 Leaf O/S
279679 LWB Rear 10 Leaf N/S
535173 LWB - 1 Ton Rear 9 Leaf O/S & N/S
562631 Lightweight Rear 7 Leaf O/S
562632 Lightweight Rear 7 Leaf N/S
The Britpart range of high quality OEM parabolic springs are made to the exacting
specifications as fitted to Santana specification vehicles. Manufactured in Spain
to the standard and quality you would expect from an OEM supplier. The correct
grade alloy steel 60SiCr8 is used, heat treated consisting of hardening & tempering
and springs are shot peened before painting. These parabolic springs will bring a
comfortable ride and improved handling to your Series vehicle.
Note - Includes ‘U’ bolts and nuts.
DA4106 Series - SWB/LWB 2 Leaf Front kit pair
DA4107 Series - SWB 3 Leaf Rear kit pair
DA2003 Series - LWB 4 Leaf Rear kit pair
“Quality you would expect from an OEM supplier...”
DA4107
DA4106
279678