
> Winching
www.britpart.com 119
Shackles & Pulleys
DA3160 DA3160A DA3160
DB1009 DB1353 DB1012
DB1322 DB1323 DB1329
DB1008
DB1002
Swivel recovery eye - stainless steel - 36mm diameter & shackle (3.25 tons)
Note - Not suitable for standard Land Rover bumpers
DA3160A Replacement shackle for DA3160
DB1009 Shackle - 1.4 ton
DB1353 ‘D’ shackle - 1.4 ton
DB1012 Shackle - 4.7 ton
DB1322 Swivel shackle
DB1323 Non-forged jate ring
DB1329 Forged jate ring
DB1008 Pulley hook - SWL loads - Pulling - 1,500kgs / Lifting - 750kgs
Snatch block
DB1002
High quality tempered steel. Maximum head load - 9,000kgs.
More product
images at
www.britpart.com
12-Strand Shackles
DA7336 NEW Pair
Breaking load - 5,830kgs
Manufactured from 11mm 12-strand
UHMWPE rope with built in UV inhibitor. These are a lightweight, easy
and safe way of joining ropes and strops. Due to the much lower kinetic
energy being stored, using these shackles is much safer in the event of a
rope or strop failure. Can also be used to attach ropes to standard towing
eyes without scratching the paintwork.
See how easy it is to use these shackles - www.britpart.com/DA7336
ARB Snatch Block 9000
DA8995
Feature side plates that sit snug against the pulley,
eliminating the possibility of the winch cable becoming
trapped between the pulley and the side plates. The
groove on the pulley itself tapers down to the centre
allowing for a variety of cable sizes (1/4”-1/2”) to be used
and ensures the cable is seated securely in the pulley,
minimizing lateral movement.
Features
> Works with steel or synthetic winch lines
> Light weight design
> Easy to use
> Doubles the capacity of your winch
> Allows winching from awkward angles
> Engineered tough for serious recovery
> Suits vehicle mounted and portable winches
> Vehicle recovery booklet enclosed
Specifications
Working load: 9,000kg (20,000lbs)
Breaking strength: 17,500kg (38,500lbs)
Side plate material: 6mm cold rolled steel
Pulley material: Specialized polymer
Pulley diameter: 110mm (4.3”)
Cable size: 8mm - 13mm (0.3”-0.5”)
Weight: 2.4kg (5.3lbs)
Greasable: Not required
ARB Snatch Block 7000
ARB209
ARB’s 7,000kg snatch block is suitable for a variety of
off-roading uses and incorporates a grease nipple to
ensure smooth pulley operation.
Working Load 7,000kg
Breaking Strength 14,500kg
Side Plate Material 5mm cold rolled steel
Pulley Material Solid billet steel
Pulley Diameter 93mm
Cable Size 6mm - 12mm
Weight 3.5kg
Greasable Yes
Photo courtesy of Ryan Ramsamooj