Page 323

Seawide Marine Distribution 2016

Seawide Distribution Your Local Nationwide Distributor Standard, Non-Isolated Series ⊲⊲2V input & 24V output share a common negative groundIsolated Series ⊲⊲Allows positive/negative ground compatibility between 12V batteryand 24V accessories. Automatic Power Selector The Automatic Power Selector (APS) is a solid state device which enables installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two isolated DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, operation continues uninterrupted. and zinc replacement costs. Item# List APS-70 Automatic Power Selector, 70A $120.00 APS-160 Automatic Power Selector, 160A $329.00 Galvanic Isolators Installing the Galvanic Isolator between the AC safety ground and DC bonding system, blocks a majority of the low voltage currents and corrosive action on the zincs is significantly reduced (while the integrity of the critical safety ground path is maintained.) This means a significant savings in boat haul-out fees and zinc replacement costs. Installing the Galvanic Isolator between the AC safety ground and DC bonding system, blocks a majority of the low voltage currents and corrosive action on the zincs is significantly reduced (while the integrity of the critical safety ground path is maintained.) This means a significant savings in boat haul-out fees and zinc replacement costs. Item# List GI-30 Galvanic Isolator, 30A $215.00 GI-50 Galvanic Isolator, 50A $255.00 Battery Isolators These heavy duty isolators allow charging multiple batteries automatically from one or two alternators, and prevent discharge or “dumping” of one battery into another. Each battery is charged according to its need without overcharging. rated for 12-48 volt negative ground DC systems. Features conservatively rated diodes and a rustproof anodized aluminum heat sink case. Models are available for 70, 120 and 165 amp alternators. Item# List 1-2-70 Battery Isolater, 1 Alt/ 2 Bank/ 70A $80.00 1-3-70 Battery Isolater, 1 Alt/ 3 Bank/ 70A $120.00 1-2-120 Battery Isolator, 1 Alt/ 2 Bank/120A $141.00 1-3-120 Battery Isolator, 1 Alt/ 3 Bank/120A $199.00 1-3-165 Battery Isolator, 1 Alt/ 3 Bank/165A $279.00 2-3-70 Battery Isolator, 2 Alt/ 3 Bank/ 70A $272.00 2-3-120 Battery Isolater, 2 Alt/ 3 Bank/ 120A $385.00 Step-Up Converters These “UP” converters produce 24 volts from 12 volt systems and are ideal for managing dual voltage applications on vessels and vehicles without having to install a 24 volt battery and dedicated charging system. Item# List 12-24-7 Step-Up DC Converter 7A $295.00 12-24-16 Step-Up DC Converter 16A $595.00 12-24-25 Step-Up DC Converter 25A $808.00 DC-DC Converters Isolated Series Same features as the Standard Series, but with the additional capability of permitting connection of negative ground gear to positive or floating ground battery systems, or vice versa. Item# List 12-24-18I DC Converter (BTO) $1,480.00 48-12-35I Converter, 20-56V to 13.6VDC 35A $1,190.00 48-24-6I DC Converter (BTO) $805.00 48-24-18I Converter, 20-56VDC to 24.5VDC 18A $1,415.00 Power Modules Power Modules function as power supply or battery charger; 12, 24 or 48 volts; positive, negative floating ground. Wire in parallel to create systems from 500-6,000 watts. Optional quick connect wiring kit allows swap-out of modules without system shutdown. 115/230 VAC, 50-60 Hz input. 19" or 23" rackmount standard. Bulkhead/shelf mounting bracket optional. Item# List PM-24-40 Rack Mount Power Module, 24V, 40A $1,860.00 PM-48-50 Rack Mount Power Module, 48V, 50A $2,690.00 Standard, Non-Isolated Series ⊲⊲12V input & 24V output share a common negative ground. Reach us 24/7 (866) 732–9433 or www.Seawide.com Newmar 321


Seawide Marine Distribution 2016
To see the actual publication please follow the link above