Page 322

Seawide Marine Distribution 2016

Battery Integrators The Battery Integrator causes no voltage drop in the charging system, while the multiple batteries are charged as a single bank whenever a charging source of approximately 13.2 VDC or 26.4 VDC or greater is present (depending on model) Item# List BI-100 Battery Integrator, 12V, 100A $169.00 BI-200 Battery Integrator, 12V, 200A $287.00 BI-24-100 Battery Integrator, 24V, 100A $185.00 StartGuard™ The abrupt DC system voltage drop that accompanies engine starting can cause microprocessor-driven communication and navigation electronics to “dump” programmed memory. StartGuard™ solves this problem by providing supplemental voltage to sensitive electronics while the engine is cranked. It contains a sealed rechargeable battery which is switched on-line to electronics when the starter switch or solenoid is engaged. When the engine is running StartGuard™ automatically goes off-line and the internal battery is recharged by the alternator. Item# List NS-12-20 Start Guard, 12 Volt 20 Amp $200.00 NS-12-20BATTERY 951-0412-0 StartGuard / NAV-PAC Battery $85.00 NAV-PAC® ⊲⊲Prevents voltage ”drop-out” to electronics ⊲⊲during engine start ⊲⊲Absorbs line “spikes” ⊲⊲Filters out electrical interference ⊲⊲Provides supplemental voltage/battery back-up for up to 15 min. ⊲⊲Remote monitor panel included. (12V unit only). Power Supplies Heavy Duty Item# List 115-12-8 Power Supply, 115VAC/12VDC 8A $379.00 115-12-20A Power Supply, 115VAC/12VDC 20A $798.00 115-12-35CD Power Supply, 115VAC/12VDC 35A $1,160.00 115-24-10 Power Supply, 115VAC/24VDC 10A $798.00 115-24-18CD Power Supply, 115VAC/24VDC 18A $1,259.00 115-24-35CD Power Supply, 115VAC/24VDC 35A $1,850.00 Item# List NP-12 Nav-Pac 12V, Prevents Voltage Drop $485.00 NP-24 Nav-Pac 24V, Prevents Voltage Drop $545.00 NP-12BATTERY NP-12 Battery, 4.0 A-H for NavPac $85.00 ⊲⊲Designed for powering 12 and24 VDC communication/navigatioequipment aboard commercial vessels where reliability is the primary consideration. ⊲⊲Input volt 115 or 230 VAC selected by slide switch on the front panel. ⊲⊲Excellent Regulation and Ripple Spec: Output voltage maintained within 1% under all line and load conditions within rating; Ripple is less than 40 mV P-P. (12 volt) or 70 mV P-P (24-volt) ⊲⊲Polyurethane conformal coated PC board and ⊲⊲corrosion resistant heavy duty aluminum case with integral shock mounts assuressurvival in hostile environments.Supply and Load Circuit Protection: overvoltage, current limit; (set @ 105% of ⊲⊲intermittent rating), thermal overload and input/ output fusing. ⊲⊲Thermally activated cooling fan on “CD” units. Power Stabilizers Feed sensitive electronics with proper voltage regardless of battery condition. These stabilizing converters provide continuous, precisely regulated output over the entire range of a battery’s usable voltage ⊲⊲Operate electronics at optimal input voltage, even from nearly drained batteries ⊲⊲Boost voltage to compensate for voltage drops in long wire runs from batteries ⊲⊲Eliminate voltage drops during momentary high current drain from batteries, as during engine start ⊲⊲Eliminate voltage fluctuation from charge sources ⊲⊲Eliminate voltage overshoot due to sudden removal of high current load Item# List 12-12-6I Power Stabilizer, 10-16V in, 12V out, 6A $285.00 12-12-12I Power Stabilizer, 12v, 12A $760.00 12-12-35I Power Stabilizer, 12v, 35A $1,295.00 24-24-3I Power Stabilizer 3.7A, 27.2VDC Output $199.00 24-24-7I Power Stabilizer 8.7A, 27.2VDC Output $465.00 Newmar Inverters/Chargers 320 Newmar


Seawide Marine Distribution 2016
To see the actual publication please follow the link above