Page 278

Seawide Marine Distribution 2016

TLM Series Fluid Sensors Maretron®’s TLM unit is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM unit mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. • works on tanks up to 40” in depth Item# List TLM100-01 Tank level Mon (40” Depth) NMEA 2000 $195.00 FPM100-01 Fluid Pressure Monitor Maretron® ’s Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of applications including water pressures, oil pressures, hydraulic pressures, or system vacuum for detecting clogged filters. Item# List FPM100-01 Fluid Pressure Monitor $395.00 TMP100 Maretron® ’s TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000® network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Item# List TMP100-01 Temperature Sensor Module, NMEA 2000® $295.00 TP-AAP-1 Ambient Air Temperature Probe* $24.50 TP-EGT-1 Exhaust Gas Temperature (EGT) Probe* $129.00 TR3K Ring/Under Bolt Temperature Probe** $21.00 * TMP100 Accessory ** DCM100 & TMP100 Accessory TLA100-01 The TLA100 is used to adapt commercially available resistive tank senders to NMEA 2000® network. The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. ⊲⊲Can be calibrated for irregular tank shapes ⊲⊲Can be used with analog gauges Item# List TLA100-01 Tank Level Adapter $295.00 AC/DCM100 Maretron® ’s ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. ACM100 output information is then displayed with networked NMEA 2000® equipment such as the Maretron® DSM250 dedicated display or with NMEA 2000® compatible software such as Maretron® N2KView®. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, charging current and terminal voltage to precisely computer battery state of charge, state of health, and time remaining. Item# List ACM100-01 AC Power Monitor, NMEA 2000 $495.00 DCM100-01 DC Power Monitor, NMEA 2000 $495.00 DCR100 NMEA 2000® Direct Curent Relay Module Maretron® ’s DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10amps. The DCR100 connects directly to an NMEA 2000® network, so you can turn on and off the relays from any device onboard or remotely running Maretron’s N2KView® software. The DCR100 easily handles resistive DC loads like lights, or inductive DC loads like pumps and motors. The DCR100 can also be used to switch AC circuits using external relays. ⊲⊲Six Relays for On / Off Control Over NMEA 2000® Network ⊲⊲Each Relay Capable of Carrying Up to 10 amps ⊲⊲Individual Relay Electrical Current Monitoring ⊲⊲Automatic Relay Over Current Shutdown (Shuts Down at ≈ 12 amps) ⊲⊲Automatic Relay Thermal Shutdown (Over Temperature Protection) Item# List DCR100-01 Direct Current Relay Module $395.00 Maretron Monitors 276 Maretron


Seawide Marine Distribution 2016
To see the actual publication please follow the link above