Defender Interior Enhancements - continued
AFP710120SS Loadspace mat retainer Single
Stainless steel strip with stainless steel fixings
SVX style cargo tie down point
DA1170 Smart and easy to fit Single
Lost a pair of trousers getting in and out of your
Defender? Here is the simple solution. Not only does it
protect your trousers, in many cases it makes the door
close more reliably and helps (though it does not entirely
stop) the seat belt getting caught in the latch. If the seat
belt does become caught as you close the door, it suffers
less damage due to the smooth profile of the X-Trouser.
The X-Trouser has a smooth profile, if your belt loop or
pocket runs over it, it will slide off freely. Made from high
quality 304 grade stainless steel. The X-Trouser catch
is reversible so it will fit both the driver and passenger
doors, left & right hand drive. It will also fit the rear side
doors of 110 Station Wagons.
Rear door stays
Does your Defender’s rear door sometimes close on you
unexpectedly? This neat and easily installed gas strut
kit will solve that problem and replaces the original door
stopper. The gas strut will hold the door in place when
open - even with a spare wheel in place - and will assist
in the opening of the rear door too with a smoother and
more controlled movement. Complete with fittings and
DA1204 Defender - up to 2002
DA1203 Defender - 2002 onwards
This roof console fits all Defenders except sunroof
equipped models. Supplied with interior lamp extension
loom and DIN blanking panel. Fitting kit and instructions
are also supplied.
The console offers a unique storage solution for the
Defender in providing additional overhead roof storage
as well as a single DIN provision in one unit. The two side
sections are designed to hold anything from maps to
sunglasses, documents to magazines.
The console is supplied in three separate pieces. The
product has been designed with CAD software and the
moulding finished off using CNC machinery to ensure an
OE level fit and finish to the product.
It is supplied with a DIN blanking panel but the central
binnacle will fit any DIN sized accessory such as a stereo,
CB/HAM radio or even a digital tachograph. The single
DIN aperture will also accept a bank of seven Carling
Technologies switches by using the Carling interlocking
Will the Defender roof console fit my vehicle?
The console has been designed to fit all post 1983
Defender models without a sunroof and with a factory
headlining. The fixing method does not require removal or
cutting of the headlining or sun visors. (Some later models
will require trimming of the central area of the headlining
when fitting a DIN unit). If you have a non-factory
headlining it is unlikely it will fit without modification of the
headlining. If you have a Series vehicle, again it is unlikely
it will fit without modification.
DA1205 Defender - up to 2007
Fitting this Defender demister kit will help demist your
windscreen better than the standard fitted demister and
has the added bonus that it will also demist your side
windows too. With full fitting instructions.
Single DIN dashboard mount
Defender - 2007 onwards
The MUD dashboard mount creates a quick and easy
method of mounting a single DIN accessory into the Puma
dashboard. You will however have to route any wiring
through the back of the dashboard. Ideal for mounting
any DIN sized CB/HAM radio unit into your Defender.
Mic extension leads are an inexpensive accessory and
commonly available so that mic can reach the driver.
The single DIN mount also comes with a handy ‘coin
tray’ which sits behind the grab handle. The dashboard
mount is also suitable as a digital tachograph mount. EU
customers should be aware that mounting a tachograph
on the passenger side of the dashboard does now meet
EEC legislation. Supplied with all fixings required to
provide a quick and easy installation. Fits both right-hand
drive and left-hand drive vehicles.
110 Utility Wagon trim panels
Protect the interior of your 110 Utility Wagon and improve
upon the crude ‘unfinished’ factory look of the Land
Rover ‘window’ trims with our MUD designed 110 Utility
Wagon Trim Panels. The MUD 110 Utility Wagon Trim Panel
fits behind the existing ‘window’ trim panel to create a
smart factory look finish. The MUD 110 Utility Wagon Trim
Panels are supplied in pairs with cargo nets that create
useful extra storage within the cabin walls. Ideal for coats,
shopping bags and pet paraphernalia! Each net features
elasticised netting and is supplied with black headed flush
fit fasteners for a professional appearance. With a typically
MUD level of attention to detail, they’ve had the plastic of
the MUD 110 Utility Wagon Trim Panel specially blended to
match the correct ‘Dark Granite’ shade of the original trim
panels to provide an OE appearance to the installation.
Each MUD 110 Utility Wagon Trim Panel is supplied with
four foam insulation panel that sit behind the trim panels
to isolate vibrations and provides an additional layer of
Defender - up to 1A999999
Black aluminium switch mounting panel