Defender Electrical Enhancements
DA4679 Dual USB charger
Easy to install in existing 12V DC socket hole providing
convenient access for charging mobile devices.
> Compatible with popular mobile devices
> Protective cap
> Easy to use
Maximum output current - 2.1A DC (total)
Cut out dimensions - 1⅛ in (28.58 mm) dia. hole
Input voltage - 12V
Output voltage - 5V DC +/- 5%
Parasitic current draw - 15mA
USB - 2.0
DA4664 Electric window kit
Defender - 2002 onwards
Fed up with winding your windows up and down?
Make life easier, add electric front windows to your
Defender with this comprehensive kit.
Includes fitting instructions.
DA5717 NEW Retrofit insert seat heaters
> Complete set for driver and passenger seats.
> Two stages of heating.
> Kit includes four heating elements and items needed
> Pre-assembled cable set with switching relay and
> Temperature guard to prevent overheating.
> Heating elements are durable and extremely flexible.
> For use on seats which have a removable cover.
> Includes fitting materials and instructions.
> Test mark: e-approved to 95/54/EC
(EMC guidelines for vehicles)
Full details in the Seats & Trim section.
DA4598 Heated mirror kit
MUD-UK Defender heated mirror elements are unlike any
other heated mirror element. They use the same carbon
impregnated glasscloth technology found in underfloor
heating and high-end bathroom mirror applications.
Unlike traditional printed circuit heated mirror elements
the current flow in flexible glasscloth is across the whole
surface area of the element. This results in a larger
‘heated’ surface area and avoids the “striping” effect of
traditional elements. The mirror elements have no fine
circuits which can damage easily and offer improved
durability and performance over traditional printed circuit
elements. The heated mirror elements are supplied with
self-adhesive backing. Peel off the backing and stick
the element to the back of the Defender mirror glass.
Also supplied with a fitting kit that consists of 4m of twin
core wire, assorted terminals and a relay. A switch is
not supplied which allows the installer to match up any
existing switches already installed. The wiring can be
concealed within the arm of the wing mirror, to create a
neat and tidy finish. Elements measure 115mm x 167mm.
DA7480 Plug and play cruise control system
Defender - 2007 onwards
Stalk fits to the right hand side of the steering column.
Waeco version available.
for full details
DA6554 LED Interior Lamp Light grey
Defender - 1991 onwards
MUD has worked in conjunction with one of the UK’s
leading automotive lighting manufacturers to create a
100% British designed and manufactured product that
uses only the highest quality components. The MUD LED
Interior Lamp utilises ceramic LED technology to provide
18 x more usable light than the traditional festoon bulb
design and with a rating of 228 lumens is 400% brighter
than the factory fitted Land Rover interior lamp. With a
colour temperature of circa 6,000K, the LED light output
falls into ‘daylight’ classification providing better colour
rendition, i.e. colours look more true to life. Another neat
feature of the MUD LED Interior lamp is the switchable
white to red illumination function for improved night-time
vision. Plug & Play connection with fixings supplied. The
MUD Interior LED Lamp will replace both front and rear
interior lamps in the Land Rover Defender. Rear Station
Wagon fitment requires the use of the optional MUD LED
Lamp plinth - DA6555. These lamps will fit the Defender
roof consoles - DA4629 & DA4629B.
DA6555 LED Interior Lamp Plinth Light grey
Defender - 1991 onwards
The MUD LED interior lamp plinth allows you to fit the
popular MUD LED lamp to the rear of a Defender Station
Wagon. The plinth gives enough room to allow the lamp
to fit to the existing wiring. Please note the plinth is not
required when fitting to the front of the vehicle.
DA6554 / DA6555
DA7481 Voltmeter gauge
Defender - up to 2006
Defender - 2007 onwards with additional pod
Photo courtesy of LRO Magazine