> Repair & Service - Consumables
DA1331 DA1333 Britpart XD Oils NEW
DA1331 NEW Britpart 10W-40 - 1 litre
A semi-synthetic multi-grade engine oil meeting ACEA and API specifications required by a large number of cars and
light commercial vehicles.
Engine design has changed rapidly over recent years. Increased output from smaller units coupled with reduced
engine oil sump capacity has put greater demands on the lubricant.
Britpart 10W-40 is designed to meet these challenges and is manufactured from a balanced blend of top quality
mineral and synthetic base stocks to produce a high quality engine oil with outstanding properties. Its naturally higher
lubricity offers lower internal friction which reduces engine wear and improves fuel economy. It provides excellent stay
in grade performance for a wide range of modern engines.
> Suitable for a wide range of vehicles
> Stay in grade properties
> Excellent high and low temperature stability
> Improved oil consumption and emissions
> Superior performance over standard mineral based oils
Britpart 10W-40 is suitable for normally aspirated and turbocharged highly stressed diesel and petrol engines in
passenger cars and light commercial vehicles. It is miscible with all synthetic and mineral based engine oils.
DA1333 NEW Britpart 5W-30 - 1 litre
Britpart 5W-30 is a fully synthetic, fuel-efficient multi-grade engine oil approved to Ford specification WSS-M2C913-D
and WSS-M2C913-C and meeting the STJLR.03.5003 Jaguar/Land Rover specification. Britpart 5W-30 is a fully
synthetic multi-grade engine oil formulated with highly refined synthetic base stocks and the very latest in advanced
additive technology. The carefully selected components combine to provide the user with improved fuel economy
benefits, greater robustness to fuels containing increased levels of bio-diesel and superior soot handling properties.
This highly stable, stay-in-grade product allows extended oil drain intervals to be achieved.
> Approved to Ford specification WSS-M2C913-D
> Approved to Ford specification WSS-M2C913-C
> Extended drain capability
> Fully backwards compatible with the earlier specifications of WSS-M2C 913-A and 913-B
> Stay-in-grade formulation
> Excellent low temperature stability for improved flow rates
> Improved fuel efficiency
> Fully synthetic formulation
Britpart 5W-30 is an ideal choice in many normally aspirated and turbocharged petrol and diesel engines designed
to use a fuel saving engine lubricant. In particular, Britpart 5W-30 can be used in all Ford diesel engines
(except Ford Ka TDCi 2009 onwards and Galaxy 1.9 TDi 2000-2006). It is strongly recommended for use in Transit
models (2012 onwards) carrying the 2.2 Duratorq TDCi engine where only WSS-M2C913-D lubricants can be used.
AdBlue Diesel Exhaust Fluid NEW
4 x 1.89 litre (½ gallon) bottles
All new Euro 6 engines now have to have a diesel
additive to reduce the emissions. The AdBlue liquid -
called Diesel Exhaust System - does this and on new Land
Rovers, they are using this more than expected, so there
is a need for people to replace the fluid used. If the fluid
runs out, the engine stops and won’t restart without a visit
to the Land Rover dealership. Previously this has only
been available through Land Rover, now Britpart have the
OE supplier product in stock.
Wet Clutch Oil NEW
This special fluid is developed for Borg Warner wet
clutch applications and is suitable for use in wet
clutches with sinter and organic plates. The oil provides
excellent friction characteristics and prevents stick-slip.
The extremely good shear stability properties ensures
optimum lubrication during the life time of the clutch. This
fluid is recommend for Borg Warner Generation II-V rear
AWD coupling control unit clutches used in Land Rover.
Photo courtesy of Pamela Blair To the speciﬁcations of Land Rover EJ3219A509AA.