> Exterior Protection
XS Mirrors exclude mirror arms.
DA1193 DA1197 DA1198
Dirt D-Fenders are a great solution to the annoying
problem of mud which splashes through the gap which
exists between the bottom of the wheel arch and the
mudflap of your Defender. They are an especially useful
addition if you are using wider tyres. The Dirt D-Fenders
attach with rivets into the underside of the sill and wheel
arch flare. Supplied in pairs with the fitting kit.
Keep the side of your Defender cleaner!
DA1193 Defender - 90/110/130 Rear of front wheel
DA1198 Defender - 90/110 Front of rear wheel
DA1197 Defender - 90 Rear of rear wheel
DA1194 Defender - 110 Rear of rear wheel
Note - DA1193 & DA1198 will not fit Defenders with
rock/tree sliders fitted.
Blind Spot Mirrors
Head Dimensions Arm Length
DA4404 Flat mirror 204 x 140mm (8 x 5½”) No arm Flat with fixing kit
DA4405 Flat mirror 204 x 140mm (8 x 5½”) 170mm Flat with fixing kit and short arm
DA4406 Flat mirror 204 x 140mm (8 x 5½”) 290mm Flat with fixing kit and long arm
DA4407 Convex mirror 204 x 140mm (8 x 5½”) No arm Convex with fixing kit
DA4408 Convex mirror 204 x 140mm (8 x 5½”) 170mm Convex with fixing kit and short arm
DA4409 Convex mirror 204 x 140mm (8 x 5½”) 290mm Convex with fixing kit and long arm
Good visibility is imperative on today’s highways and byways so these new high impact resistant mirror heads are an
> Optical quality polycarbonate lens - will not shatter like glass or discolour in sunlight.
> Strong, flexible polypropylene casing - will absorb hard blows without breaking.
> Universal - can be fitted to either left or right of vehicle.
> Lightweight - puts less strain on body fixings.
> Hard lacquer coating on lens - will repel condensation and surface water.
> Excellent reflectivity - superb daylight and night time vision.
DA2128 Mirror arm 7” Standard
DA2130 Mirror head 7 x 5” Standard
DA2301 Mirror glass 7 x 5” Standard
MTC5083 Mirror arm 7” Standard
RRC8443 Mirror arm 11½” Large
MTC5084 Mirror head 5 x 8” Standard
DA4034 Mirror head 6 x 10½” Large
MTC5217 Mirror assembly Standard
DA6550R Right hand side
DA6550L Left hand side
Working closely with
one of Europe’s
MUD has created
a retrofit mirror
for the Defender
a wide angle
convex mirror to
spots. The Blind
Spot Mirror function
offers a huge
road safety, making
whether you’re in
slow or fast moving
The surface area of
the XL Defender Mirror Head measures 245mm x 140mm
compared with the standard mirror glass area of 198mm
x 124mm. The mirror area of the MUD Blind Spot mirror
is 173mm x 127mm and the convex section is 52mm x
127mm. The convex section is fixed and not adjustable.
The MUD Blind Spot mirror is a straight swap for the
original Defender door mirrors, using the same fixing
method as the factory mirrors and even retain the same
styling as the original Defender door mirror to ensure
an OE factory appearance. The MUD Blind Spot Mirror
is housed within a larger mirror head that in addition
to providing a larger reflective surface area than the
standard Defender mirror glass, features the convex
wide angle mirror glass. The mirror insert can be flipped
through 180 degrees within the mirror head so the
wide-angle can be positioned at the top or the bottom
of the mirror. The MUD Blind Spot Mirror has been fully
homologated, E-marked and carries full EU Type Approval.
Heated mirror kit
See vehicle enhancement section for more details.
DA6892 NEW XS Wing mirror Black Single
DA6893 NEW XS Wing mirror Silver Single