Page 191

Ford Racing Catalogue Web

DRIVELINE MUSTANG SVT WHEEL 2007 MUSTANG SVT BLACK M-1007-S1895 a140 WHEEL WITH MACHINED LIP • 2005-2013 Mustang GT, 2011-2012 V6 and the M-1007-S1895B1 a140 2007-2012 Shelby GT500 • 2005-2012 Mustang GT, 2005-2012 V6 and the 2007- • 18" x 9.5" wide 2012 Shelby GT500 • 5-lug, 4.5" bolt circle • 18" x 9.5" wide • 45 mm offset • 5-lug, 4.5" bolt circle • 7.125" backspacing • 45 mm offset • Includes “SVT” center cap M-1096-N • 7.125" backspacing • Same as production 2007-2009 • Includes “SVT” center cap Mustang Shelby GT500 • Same as production • Manufactured in batches, color 2007-2009 Shelby GT500 may not match factory wheels except wheel face is gloss • Fits 2005-2010 Mustang V6 black with machined lip equipped with M-2300-D • Clears M-2300-D 12.4" brake kit Brake Kit • Fits M-2300-S Brembo® Brake Kit • Fits M-2300-S Brembo® • Band TPMS compatible Brake Kit • Not compatible with valve • Band TPMS Compatible stem mount TPMS • Not compatible with valve stem mount TPMS NOTE: a140 For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use Steering Stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use Steering Stop 6R3Z-3932-CA. For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use Steering Stop 6R3Z-3932-CA. 2011-2013 Mustang may require steering stops. Call the Techline at 1-800-FORD788 for more information. 2010-2013 F-150 SVT RAPTOR F-150 SVT RAPTOR BEAD-LOCK BEAD-LOCK WHEEL RING WITH FASTNERS M-1007-DC1785 M-1021-F15RA • Fits 2010-2013 F-150 Raptor • Fits 2013 F-150 SVT Raptor with factory bead-lock wheel • 17 x 8.5 wide option (64A) • Includes bead-lock wheel, center cap, bead-lock ring, 24 • Includes aluminum bead-lock ring, 24 fasteners, and fasteners and mounting instructions mounting instructions • Bead-lock configuration is for off-road use only • Bead-lock configuration is for off-road use only EXTERIOR CHROME CLEANING PROCEDURES • Wash the vehicle first, using cool or lukewarm water and a neutral pH shampoo, such as Motorcraft® Detail Wash (ZC-3–A). • Use Custom Brite Metal Cleaner (ZC-15), available from your authorized dealer. Apply the product as you would a wax to clean bumpers and other chrome parts; allow the cleaner to dry for a few minutes and then wipe off the haze with a clean, dry rag. ALUMINUM WHEELS AND WHEEL COVERS CLEANING PROCEDURES Aluminum wheels and wheel covers are coated with a clearcoat paint finish. In order to maintain their shine: • Clean weekly with Motorcraft® Wheel and Tire Cleaner (ZC-37–A) available from your authorized dealer. Heavy dirt and brake dust accumulation may require agitation with a sponge. Rinse thoroughly with a strong stream of water. • Never apply any cleaning chemical to hot or warm wheel rims or covers. • Some automatic car washes may cause damage to the finish on your wheel rims or covers. Chemical-strength cleaners, or cleaning chemicals, in combination with brush agitation to remove brake dust and dirt, could wear away the clearcoat finish over time. • Do not use hydrofluoric acid-based or high caustic-based wheel cleaners, steel wool, fuels or strong household detergent. • To remove tar and grease, use Motorcraft® Bug and Tar Remover (ZC-42), available from your authorized dealer. For important information about the proper usage of performance parts, please see page 14. See pages 286-292 for important safety, emissions and warranty information. www.fordracingparts.com 189


Ford Racing Catalogue Web
To see the actual publication please follow the link above