Page 180

Ford Racing Catalogue Web

DRIVELINE 2005-2013 8.8" MUSTANG AXLE KIT M-4006-S197 • Factory 8.8" axle housing kit for 2005-2013 Mustang • Perfect for building a custom axle! • Allows you to customize your gearset and differential • Includes: • Axle housing • Housing vent • Left and right 31-spline production axle shafts • 2005-2009 Mustang pinion flange • 2003-2004 Cobra 1350 pinion flange • Cover bolts • Pinion washer • C-locks • M-4210-B Ring and Pinion Installation Kit • M-1126-C Shim Kit 2005-2013 8.8" MUSTANG AXLE ASSEMBLIES • 31-spline axles and Traction-Lok differential with carbon fiber clutch discs M-4204-F318C • Includes axle shafts • Can use with 8.8" Axle Girdle Cover M-4033-G2 M-4001-A355 3.55:1 gear ratio • Fits 2005-2013 Mustang GT • Can also use with 8.8" Finned Aluminum Axle Cover Kit M-4033-K • Standard equipment on base 2012-2013 BOSS 302 and 2011-2012 or M-4033-KA Mustang Shelby GT500 Performance Package M-4001-SVT373 3.73:1 gear ratio • Includes high-torque pinion bearing as found in Shelby GT500 and • Fits: 2011-2013 Mustang V6, 2005-2013 Mustang GT and used in gear installation kit M-4210-B2 2007-2012 Mustang Shelby GT500 • Includes finned aluminum axle cover M-4033-K 8.8" AXLE GIRDLE COVER KIT 1999-2004 COBRA IRS AXLE M-4033-G2 GIRDLE COVER • Fits 8.8" axle M-4033-G3 • Fits 1986-2004 Mustang GT • Fits 1999-2004 Mustang Cobra • Low-profile design also fits 2005-2013 • Load bolts provide additional Mustang GT and 2007-2012 Shelby GT500 support for differential • 356-T6 aluminum casting bearing caps replaces rear cover on 8.8" • Increased ring and • Load bolts provide additional support pinion gear life for differential bearing caps • Fits IRS only • Increase ring and pinion gear life • Will not fit IRS NOTE: Check exterior clearance to chassis/suspension. 8.8" ALUMINUM AXLE COVER WITH DIFFERENTIAL 8.8" ALUMINUM AXLE COOLER PICKUP AND RETURN PORTS COVER KIT M-4033-KA M-4033-K • Original equipment on 2013 Mustang Shelby GT500 with Track Pack option • Original equipment on 2011 Mustang Shelby GT500 • Fits 8.8" Ford rear end • Fits 8.8" Ford rear end • Recommended for road racing or extended high speed/high temperature applications to • Cooling ribs reduce gear oil temperature reduce gear oil break down, increase gear and bearing life • Includes 10 hex-head bolts with • Cooling fins help reduce gear oil temperature anaerobic yellow thread • Cover machined for differential cooler pickup and return locking compound fittings. 1/2 -14 NPSF dryseal straight pipe threads • Will not fit • Pipe plugs installed, must be removed IRS differential to install differential cooler fittings • Includes 10 hex-head bolts with anaerobic yellow thread locking compound • Includes 7/16-20 UNF vent plug when used in applications with alternative vent provisions • Cover machined for temp sensor with M10 x 1.6-6h threads • Will not fit IRS differential For important information about the proper usage of performance parts, please see page 14. 178 Techline (800) FORD788 See pages 286-292 for important safety, emissions and warranty information.


Ford Racing Catalogue Web
To see the actual publication please follow the link above