Page 178

Ford Racing Catalogue Web

DRIVELINE CLUTCHES PART NUMBER DESCRIPTION ENGINE DIAMETER SPLINE TECHNICAL INFORMATION M-7560-A302N HD Clutch Kit SBF V8 10.5" 1-1/16" x Consists of M-7550-A302N Disc, M-7563-A302N a140 a141 a142 a143 10 spline Pressure Plate and D9ZZ-7548-A Throwout Bearing. M-7560-E302 HD Clutch Kit SBF V8 10.5" 1-1/16" x Fits 1986-2001 Mustang GT, 1993-1998 Cobra with 10 spline T-5 or T-45 transmission. Consists of clutch disc and pressure plate. Heavy-duty diaphram-type clutch assembly with 25% more torque capacity than stock. M-7560-T46 11" Clutch Kit 4.6L DOHC 11" 1-1/8 x Kit contains 11" clutch disc with 26-spline hub and a140 26 spline pressure plate. Clutch disc with with carbon/ copper lining on pressure plate side. Centrifugal assist design pressure plate with 25% more torque capacity than production Cobra. Used when installing M-7003-R58C and M-7003-R58H transmission into 1996-2004 4.6L Mustang with production 11" fl ywheel or Ford Racing Flywheels M-6375-F46, M-6375-G46, or M-6375-R00. M-7550-X302 Disc SBF V8 10.5" 1-1/16" x HD disc with carbon/copper lining on flywheel a140 a141 a142 10 spline side and carbon lining on pressure plate side. M-7550-T302 Disc SBF V8 10.5" 1-1/8" x HD disc with carbon/copper lining on flywheel a140 a142 26 spline side and carbon lining on presssure plate side. Designed for 26-spline shaft on M-7003-R58C and M-7003-R58H transmissions. Will work with M-7563-A302N/B302/ C302N/D302 Pressure Plates. M-7563-B302 Pressure Plate SBF V8 10.5" 1-1/16" x HD diaphragm-type with centrifugal a140 a142a143 10 spline assist. Has approx. 25% more capacity than stock Mustang unit. Cast iron plate. NOTES: a140 Clutches have NO warranty! a141 All clutch discs have 1.0625"-10 spline hub. a142 Fits all 1986-2001 Mustang GT, 1993-1998 Cobra with T-5 or T45 Transmissions. 2001-2004 Mustang GT with 3650 transmission and 1999-2003 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-1985 vehicles equipped with 10" clutch requires new flywheel (see page 174). Metric fasteners and dowel pins must be used with 10.5" clutches. a143 Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-B. Ford Racing kit M-6397-A302 (see page 173). 1979-2004 MUSTANG V8 ROLLER PILOT BEARING ROLLER PILOT BEARING HD THROWOUT BEARING FOR 289/302/351C 4.6L/5.4L MODULAR M-7548-A AND 351W ENGINES • Fits 1979-2004 Mustang with M-7600-A M-7600-B manual transmission and V8 engine • Production roller pilot bearing fits 289, 302, • Production roller pilot bearing fits 4.6L/5.4L • Self-centering bearing design 351C and 351W crankshafts Modular engines • Heavy-duty design lasts • Designed for .669 diameter NOTE: Pre-greased—do not longer than most input shaft add extra grease. Clutch and aftermarket bearings NOTE: Pre-greased—do not bearing damage may occur add extra grease. Clutch and bearing damage may occur For important information about the proper usage of performance parts, please see page 14. 176 Techline (800) FORD788 See pages 286-292 for important safety, emissions and warranty information.


Ford Racing Catalogue Web
To see the actual publication please follow the link above