Page 138

Ford Racing Catalogue Web

ENGINE COMPONENTS ALUMINATOR ACCESSORY 1985-1993 MUSTANG 351W ENGINE SWAP DRIVE KIT BRACKETS M-8600-A46SC M-8511-A351 Power steering only • The easy way to dress our Aluminator short blocks or long blocks! M-8511-B351 Power steering andA/C Take the cost and guess work out of finding the correct accessories! • Fits 1985-1993 Mustang 351W • Complete front-end accessory drive to dress the supercharged • These brackets allow use of your 5.0L front-end accessory drive Aluminator Long Block M-6007-A46SC components when swapping to a 351W (5.8L) engine. Simply replace • Designed for use on M-6007-A46SC production bracket with the new bracket using all existing bolts and • Includes alternator, power steering pump, A/C eliminator, all pulleys, hardware. Serpentine belt selection will vary, depending on whether or fasteners and belts not you choose to use optional underdrive pulleys • Crankshaft damper included on long block, NOT included in kit • Derived from 2003-2004 Mustang Cobra M-8511-B351 M-8511-A351 BOSS 302R 5.0L POWER STEERING PUMP BRACKET M-8511-M50BR • Bracket allows power steering pump to be mounted to 2011-2013 5.0L Mustang engine 5.0L 4V 10-RIB SUPERCHARGER • Allows power steering pump from ACCESSORY DRIVE KIT 2005-2010 Mustang GT to be used M-8511-M5010 • Power steering pump mounts in position This 10-rib supercharger drive kit is for those seeking maximum of factory A/C compressor performance out of their supercharged 5.0L Mustang. Developed for the 2013 Cobra Jet, the 10-rib accessory drive system is for high rpm or high boost 5.0L supercharged engines. MUSTANG BOSS 302 ALTERNATOR KIT • Includes all fasteners, adapter plates, alt. pulley, water pump pulley, five idler pulleys, and exclusive Aramid cord belt for maximum durability M-8600-M50BALT • All aluminum bracketry, pulleys, and adapters are anodized for a durable This kit includes special high-performance components as used on the surface finish and corrosion resistance production 2012-2013 Mustang BOSS 302 and is designed to operate at • All fasteners are high-grade stainless steel higher rpm. • Recommended for use with ATI Racing 20% overdrive SFI crankshaft This kit fits Mustang GT 5.0L Ti-VCT engine and features: damper (Part No. 918048) and Thump Racing (Phone: 1-862-210-8512) • High-performance BOSS alternator with 1-way clutch to prevent belt billet tensioner (Part No. PM-1005-GT500). Factory 5.4L tensioner 7R3Z- hop-off during upshifts 6B209-AA can be used but not recommended • Higher tension belt tensioner • Works with all Ford Racing/Whipple® 5.0L supercharger kits (Whipple® • Larger pulley to slow the armature speed, reduce drag and reduce 10-rib supercharger up-fit required on 2.3L; 10-rib pulley required for parasitic hp loss 2.9L/4.0L; contact Whipple® Superchargers for details: 559-442-1261) • Also fits M-6007-M50 5.0L 4V Ti-VCT, M-6007-A50NA - A50SC - • Retains all factory accessories M50B and M50BR crate engines • Kit includes OEM Mustang BOSS 302 alternator, tensioner, idler pulley belt and mounting hardware For important information about the proper usage of performance parts, please see page 14. 136 Techline (800) FORD788 See pages 286-292 for important safety, emissions and warranty information.


Ford Racing Catalogue Web
To see the actual publication please follow the link above