Page 130

Ford Racing Catalogue Web

ENGINE COMPONENTS FORD RACING HIGH-PERFORMANCE OIL FILTERS SOLD AS CASE OF 12 • Synthetic-Polymer/Cellulose-Fiber blend media • Long life with standard and synthetic motor oils • Heavy-gauge base and canister for higher burst strength • Up to 50% more filtering capacity than standard filters and impulse fatigue resistance • Improved filtering efficiency • High-quality silicone anti-drain back valve • This technology is only available through • Non-stick sealing gasket for ease of installation and removal Ford Racing Performance Parts Motorcraft® PART NUMBER PERFORMANCE FILTER PART NUMBER FL1A CM-6731-FL1A (Each) M-6731-FL1A (Case of 12) FL820S CM-6731-FL820 (Each) M-6731-FL820 (Case of 12) 90-DEGREE OIL 2005-2009 4.6L WATER FILTER ADAPTOR INLET/OIL FILTER ADAPTOR M-6880-A50 M-6881-A5 • Screws into block and rotates filter toward • Fits 2005-2009 4.6L aluminum block engines and Ford Racing front of engine to provide clearance for Aluminator engines engine swaps and chassis modifications • Requires 2" lower hose • Fits most Ford push rod engines that use • Significant improvement in engine cooling by reducing the pressure Ford Racing CM-6731-FL1A or Motorcraft® drop to the water pump FL-1A oil filter (filter sold separately) • 7/8"-14 AN straight thread O-ring fittings for oil inlet/outlet • 1/4"-18 NPFS fittings for oil temp./pressure • Requires remote oil filter lines, fittings 90-DEGREE OIL FILTER ADAPTOR and filter adapter for installation MODULAR ENGINE (not included) M-6880-M22 • Adaptor kit screws into block and rotates filter toward front of engine to provide clearance for engine swaps and chassis modifications • Fits Ford Modular engines and V6 that use FL-820 or FL-500 oil filters • Uses Ford Racing CM-6371-FL1A or Motorcraft® FL1A oil filter (sold separately) MUSTANG BOSS 302 ENGINE OIL COOLER BOSS 302 OIL COOLER KIT M-6642-MB M-6642-MBA • Original equipment on 2012 Mustang BOSS 302. Fits 2011-2013 • Fits 2012 Mustang BOSS 302 Mustang GT with 5.0L 4V Ti-VCT engine • Recommended for track use. Capable of removing • Engine-mounted oil cooler used on 2012 Mustang BOSS 302 engine between 27,000 - 39,000 btu/hr of heat • Water-to-oil type cooler Kit includes: • Kit includes 2012 BOSS 302 radiator hose with • Black anodized billet aluminum oil filter adapter integral oil cooler fitting • Setrab oil cooler, fully brazed construction with black epoxy finish • Uses M-6731-FL820 Ford Racing • Pre-assembled, light weight, high-performance -10 smooth bore hose with 5-ply oil filter composite construction. Hose is rated to 400 deg F with a burst pressure over 1000 psi • Black powdercoated cooler bracket • Installation kit includes AN fittings, cooler isolators and bolts/washers/nuts 2011-2013 5.0L 4V Ti-VCT REMOTE OIL FILTER ADAPTOR M-6881-M50 • Fits 2011-2013 5.0L 4V Ti-VCT aluminum block engines • Includes adapter to block O-rings and • Made from billet aluminum mounting bolts • Allows installation of remote mounted oil filter and oil cooler • Can be used with M-6007-M50 crate engine • Designed for -10 AN lines with O-ring port fittings when stock oil filter requires relocation For important information about the proper usage of performance parts, please see page 14. 128 Techline (800) FORD788 See pages 286-292 for important safety, emissions and warranty information.


Ford Racing Catalogue Web
To see the actual publication please follow the link above